program
Výrobní program O firmě Certifikáty Ceník Kontakty
1. Pre-insulated Pipeline Systems
Introduction – General Information
Applied Materials
Medium-Conducting Pipeline
Outer Protective Layers
Pipeline and Fittings
PIP 130 A, B, C
PIP 180 A, B, C
PIP 210, 240, 270
PIP 300 A, B, C
Elbows, Branches, Reducers, Compensators, Fixed Points
Accessory Parts - Entries, Pipeline Ends, Expansion Cushions
Mounting Instructions for Pipeline Connection, Coupling Design
Safety Regulations
Handling, Storage
Planning Activity Documents
Earth Works
Thermal Losses of Distribution Systems – k-Coefficient
Heat Dilatation PIP
Solution of Heat Dilatation
Compensating Bodies L, Z, U
Heat Tensioning of Pipeline
Axial Compensators
Steam Distribution System
Installation Length, Friction Forces, Pipe Cross-Sections
Monitoring System
2. Production Assortment of the Company IZO

Thermal Insulating Layers

Hard polyurethane foam - PUR:

In basic version PIP 130 it serves as a hard polyurethane foam meeting EN 253, approved by the Hannover testing laboratory. The heat insulating material made by addition reaction of isocyanate and polyol is concerned. Our Company uses cfc-free system blown by CO2.

Characteristic of material:
Volume weight 75 ± 5 kg/cu. m
Pressure strength 0.45 N/sq. mm
Thermal resistance -200 ÷ +140 °C
Absorption capacity max. 5,5 %
Closeness of cells 94 %
Blowing agent CO2
Coefficient of thermal conductivity     λ       0.03 Wm-1K-1

Impregnated mineral wool:

For temperatures above 140 °C the laminated insulation is used, where the first insulating layer on the medium-conducting pipeline is made of the impregnated mineral wool. The temperature on transition of the hydrophobic mineral wool - PUR reaches max. 120 °C.

Characteristic of material:
Volume weight 150 ± 5 kg/cu. m
Pressure strength 0.3 N/sq. mm
Absorption capacity 1 %
Melting point of fibres 1000 °C
Coefficient of thermal conductivity     λ       0.035 Wm-1K-1

« Medium-Conducting Pipeline
Outer Protective Layer »